{ "id": "corrugated-washer-drain-hose-5-foot", "sku": "corrugated-washer-drain-hose-5-foot", "title": "Corrugated Washer Drain Hose 5 Foot Extension Kit", "slug": "corrugated-washer-drain-hose-5-foot", "price": 29.99, "currency": "AUD", "availability": "in_stock", "category": "appliance-drain-hoses", "category_label": "Washing Machine & Dishwasher Drain Hoses", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": null, "images": [ "https://drains.net.au/dropship-images/appliance-drain-hoses/corrugated-washer-drain-hose-5-foot/main-corrugated-washer-drain-hose-5-foot.jpg", "https://drains.net.au/dropship-images/appliance-drain-hoses/corrugated-washer-drain-hose-5-foot/corrugated-washer-drain-hose-5-foot-2.jpg", "https://drains.net.au/dropship-images/appliance-drain-hoses/corrugated-washer-drain-hose-5-foot/corrugated-washer-drain-hose-5-foot-3.jpg", "https://drains.net.au/dropship-images/appliance-drain-hoses/corrugated-washer-drain-hose-5-foot/corrugated-washer-drain-hose-5-foot-4.jpg", "https://drains.net.au/dropship-images/appliance-drain-hoses/corrugated-washer-drain-hose-5-foot/corrugated-washer-drain-hose-5-foot-5.jpg", "https://drains.net.au/dropship-images/appliance-drain-hoses/corrugated-washer-drain-hose-5-foot/corrugated-washer-drain-hose-5-foot-6.jpg", "https://drains.net.au/dropship-images/appliance-drain-hoses/corrugated-washer-drain-hose-5-foot/corrugated-washer-drain-hose-5-foot-7.jpg" ], "description_short": "A 1.5 metre polypropylene hose with a 30 mm connector, white adapter, clamps and a movable hook hanger, so the outlet sits exactly where your drain is.", "description": "The problem nobody plans for\n\nLaundry layouts change. You buy a dryer and the washer shuffles along the wall. You move house and the standpipe sits a metre further left than it did at the old place. You pull the machine out to clean behind it and discover the drain hose has been folded flat against the skirting board for three years.\n\nIn every one of those situations, the limiting part is the same: a short, stiff drain hose that only ever reached one specific spot. It is a small piece of plastic, and it quietly decides where a large appliance is allowed to live.\n\nA corrugated washer drain hose 5 foot kit solves that by adding 1.5 metres of flexible run plus the fittings needed to join it to what is already there. It is one of the cheaper fixes in a home, and it takes about as long as making a cup of tea.\n\nHow a drain hose actually works\n\nYour washing machine does not drain by gravity alone. A small pump pushes water out of the drum, up through the hose, and over into the standpipe or tub. That is why appliance manuals specify a minimum and a maximum drain height.\n\nTwo things matter for that pump to do its job. The bore of the hose has to stay open along the whole run, and the outlet has to stay where you put it.\n\nThe first is about kinks. A smooth-walled hose bent past a certain radius pinches shut, and once the plastic takes a set it stays pinched even when you straighten it. The pump then works against a restriction, cycles take longer, and some machines throw a drain error. A corrugated wall behaves differently. The ribs let the hose fold on the outside of a bend while the inside stays round, and the wall springs back after pressure. With a nominal 1.5 mm wall in polypropylene, this hose has enough body to hold a curve without collapsing.\n\nThe second is about the hook hanger. A hose sitting loose in a standpipe will slowly climb out under the pulsing pressure of the pump. Most people discover this the morning after, when there is water across the floor. The hanger clips onto the hose and slides along it, so you set the height you need and lock the outlet in position over the drain. It also stops water splashing back out of the pipe.\n\nWhat comes in the box\n\nThe kit is built around the 1.5 metre hose. With it come a white adapter, clamps and the movable hook hanger.\n\nThe adapter is 21 mm in diameter and is meant for water pipes with an internal bore of about 20 mm. Its job is to let you extend an existing hose rather than rip it out and start over. You connect the adapter, join the new length and clamp both joints.\n\nThe clamps cover an 18 to 32 mm range, which takes in the hose connector, the adapter and most standard domestic pipe sizes. They are what turn a push-fit into a joint that holds. A hose pushed on and left unclamped will eventually work loose, and that is the single most common cause of a laundry flood.\n\nThe hose connector itself has a 30 mm inner diameter, roughly 1.2 inches. That is the standard spigot size on most domestic roller washers, front loading and top loading alike.\n\nWho this suits\n\nIf your machine sits more than a hose length from the drain, this is for you. Same if you are planning to move an appliance, stack a dryer, or build a laundry cupboard where the plumbing is at one end and the machine is at the other.\n\nIt is also a straight replacement when the original hose has split, gone hard, or kinked permanently. Hoses age. Hot water, detergent and years of being squashed behind a heavy machine all take a toll, and the first sign is usually a damp patch you cannot quite explain.\n\nDishwashers are the other common use. The best dishwasher drain hose extension job is often exactly this kit, because dishwasher waste lines use similar diameters and the same clamp-and-push method. Portable washing machines that drain into a laundry tub also benefit, since the hanger holds the outlet over the tub edge rather than letting it swing free.\n\nHow to choose the right one\n\nStart with the outlet diameter on your appliance. Pull the machine out, look at the spigot the current hose slides onto, and measure across it. If you land near 30 mm, this hose connector will fit. If you are well off that number, you need either a different hose or a step adapter.\n\nNext, measure the distance you actually need. Run a tape from the back of the machine, along the floor, around whatever corner is in the way, and up to the drain point. Then add a bit of slack. A hose stretched tight is a hose that will pull off a fitting eventually.\n\nThen check your drain height against the appliance manual. Too low and the machine can siphon water out of the drum part way through a cycle, so it keeps refilling. Too high and the pump labours. The hanger gives you the control to set this properly instead of guessing.\n\nFinally, think about total length. Every joint and every metre adds resistance. Most manuals give a maximum recommended drain run, and it is worth a look before you chain two hoses together.\n\nFitting it without drama\n\nTurn the machine off at the wall and have a towel and a shallow tray ready, because the old hose will hold some water.\n\nLoosen the clamp on the existing hose and work it off the spigot. Push the new hose on, as far as it will comfortably go, and slide a clamp over the joint before tightening it with a screwdriver. Firm is enough. Plastic does not need brute force, and over-tightening can distort the fitting.\n\nIf you are extending rather than replacing, fit the white adapter between the old hose and the new length and clamp both sides. You do not have to remove the existing hose from the machine at all.\n\nClip the hook hanger onto the hose, slide it to the position that puts the outlet at the right height, and settle it over the standpipe or tub edge. Make sure the end sits inside the drain but not so deep that it seals against the pipe, since air needs to escape past it.\n\nThen run a short rinse or spin cycle and watch. Water flowing under pump pressure will reveal a loose clamp straight away, which a dry test never will. Check each joint with your fingers for damp, tighten anything that weeps, and that is the job done.\n\nKeeping it working\n\nFlush the hose with clean water occasionally. Lint, fibres and detergent film build up inside over time and slowly narrow the bore.\n\nCheck the clamps every few months, and always after you move the machine. Vibration loosens things.\n\nKeep the run free of hard folds, and do not shove the appliance back so far that it sits on the hose. When you take the hose off and store it, coil it loosely instead of folding it.\n\nReplace it when you see splits, chalky brittle patches, or a connector that no longer grips the spigot firmly. Compared with repairing a water-damaged floor, a new hose costs almost nothing.\n\nThe short version\n\nA drain hose is a small part with an outsized ability to ruin a weekend. This kit gives you 1.5 metres of white corrugated polypropylene, a 30 mm connector that suits most domestic machines, an adapter and clamps for joining to existing pipework, and a hanger that keeps the outlet exactly where you put it.\n\nMeasure your outlet, measure your run, clamp every joint, and test it under live water before you push the machine back. Do that and you will not think about it again for years.", "llm_summary": "The Leanockesa Corrugated Washer Drain Hose 5 Foot is a white polypropylene drain hose kit measuring 1.5 metres with a nominal wall thickness of 1.5 mm. The hose connector has a 30 mm (1.2 inch) inner diameter to suit most domestic roller washing machines. The kit includes a white adapter of 21 mm (0.8 inch) diameter for pipes with roughly a 20 mm internal bore, clamps covering an 18 to 32 mm range, and a movable hook hanger that clips anywhere along the hose to hold the outlet over a drain. The corrugated wall resists kinking and returns to shape after being compressed. Installation requires no tools. Product weight, packed dimensions and country of origin are not specified by the maker.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Australian Consumer Law consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Leanockesa", "gtin": null, "mpn": null, "condition": "new", "url": "https://drains.net.au/corrugated-washer-drain-hose-5-foot/", "canonical_url": "https://drains.net.au/corrugated-washer-drain-hose-5-foot/", "json_url": "https://drains.net.au/api/products/corrugated-washer-drain-hose-5-foot.json", "updated_at": "2026-10-11" }